Why choose a MODULAR FURNACE SYSTEM?

Modular furnaces are the most versatile furnace systems for heat treatment, because of their flexible footprint, multi-process capabilities, and variable working temperature range. These systems have been proven to increase productivity, improve distortion control, meet or surpass metallurgical expectations while offering a cleaner, safer working environment.

KEY BENEFITS

  • • Efficient multi-process capabilities
  • • No compromise to productivity with the ability to perform smaller load sizes
  • • Higher working temperatures to reduce cycle time
  • • In-house logistics savings (ex. internal transfer of parts or no external services needed)
  • • Smaller, flexible footprint (expandable if production increases)
  • • Complete package with pre-/post-processing, robotics and storage options

MODULAR CAPABILITIES

Today, it is easier than ever to work with your existing production layout and current equipment to integrate a modular furnace. Some modular furnaces integrate directly into the production line while others have their own designated area. Due to its cold-wall technology, vacuum furnace installations support a safer environment and do not need to be separated from pre-/post-processing operations.

Modular furnaces support multi-process heat treatment with load designs ranging from 100kg to 1000kg, and variable load sizes from one to thousands of parts in the same load. This multi-process capability is possible through the heating cell working temperature range up to 2192°F [1200°C], gas quenching up to 290 psig [20 bar] under nitrogen or helium, and oil quenching (hot or cold) when cooling range is needed. The ECM FLEX modular furnace further expands modular capabilities by supporting a sealed tunnel furnace design with an internal loader that allows for load transfer with the absence of oxygen for sensitive materials and processes (ex. rare earth magnets, etc…).

Thanks to automation with ECM Robotics, modular furnaces can also integrate pre/post- heat treat operations, such as: loading/unloading, washing, deep-freezing, and tempering. From dunnage/sorting to handling large loads weighing over 1,000 kg, ECM Robotics meets the needs of manufacturers looking to optimize their production flow and assure operator safety.

 


Learn about our new CCN CELL for Nitriding, FNC, Carbonitriding, Dry Oxidation, High Temperature Annealing & Tempering

 

FOOTPRINTS

There are three types of manufacturing footprints to consider with modular furnaces.

1. In-Line Heat Treat Production This method integrates the heat treat department into the open manufacturing area and brings soft machining in-line before heat treating. This is all possible due to cold-wall technology and modular footprint that fits directly into the machining centers

2. One-Piece Flow Eliminates multiple storage area requirements, reduces inter-production logistics (WIP), allows for short/flexible cycle times, and removes post-washing/post-machining with lower distortion using high pressure gas quenching

3. Island Manufacturing Same benefits of one-piece flow manufacturing but set-up in a grid format or using AMRs to connect the islands

CONTINUOUS vs. BATCH vs. MULTI-BATCH PROCESSING

Continuous furnace systems are the most up-front economical option – but they have constraints. These systems are limited to one process temperature, larger footprints, and are only available with conventional atmosphere furnace technology. To note, most importantly, if there is a failure in a pusher row then production will halt and it will be difficult to recover. It is a time consuming process to cool the furnace and remove the jam, as well as, re-processing the loads properly. Batch furnaces can end up being more costly and add additional lead time for expansion; however, they are more independent than a continuous furnace system. Batch furnaces also require one quench for each furnace, whereas a modular system can have sometimes 8 to 16 cells served by ONE quench unit.

Benefits of a batch furnace system include multiple recipe processing capabilities and a smaller/more easily integrated footprint; however, compact modular systems can also easily process loads with different metallurgical parameters.

The most versatile and cost-efficient option is the modular furnace system. With each batch, different parts can be heat treated separately since every chamber is independent while using one quench chamber. Quenching on these systems can be oil, gas or both as multiple quenching cells can be installed in the same production line. When under a strict maintenance schedule, this system is highly beneficial and has been successful in replacing most pusher-style furnaces used for carburizing in the heat treating market today.  While larger in size, the footprint is optimized for daily production and future-ready for expansion. The downside of a modular furnace system? The initial investment. It can be considered higher compared to other system options, but the ROI is quickly justified by reduced cycle times, process repeatability, improved metallurgical results, and the important facets and standard features that lead to higher safety for personnel and the surrounding facility.


Are you curious about how your process can benefit from transitioning to a modular vacuum furnace system? Contact us & schedule a visit to our ECM USA Synergy Center to test your parts in our NANO vacuum furnace with 20 bar gas quench!

Top